Adapters, Sockets, and Current T

142 found, showing page 2 of 4

ALM COAX WALL PLATE

For professionally installed coaxial cable outlet, use our flush mount RG6 or RG59 coaxial cable wall plate with gold-plated F-connector.

6' RG6 BLACK COAX CABLE

If you need a quality cable that can be used with an antenna, VCR, TV, cable box, or satellite receiver; 6' digital RG6 coaxial cable with F connector carries both audio and video signals. Great for older devices that don't have RCA or any of the newer audio video connections.

SPLITTER COAX 4-W***************

Our 4-way video signal splitter splits a coaxial video signal from cable TV, antenna, or a VCR for connection of up to 4 TVs, DVD's, or VCRs with a frequency of 5 to 900 MHz.

2PK COAX CABLE CONNECTOR********

Extends the reach of coax cables with F connectors.

12' BLK COAX CABLE

If you need a quality cable that can be used with an antenna, VCR, TV, cable box, or satellite receiver; 12' digital RG6 coaxial cable with F connector carries both audio and video signals. Great for older devices that don't have RCA or any of the newer audio video connections.

WHT GRND TRIPLE TAP

Plug-in, 3-prong grounding, multi-outlet tap. Converts a single grounded outlet (3-prong) to a grounded triple outlet source. 15A/125V. UL (Underwriter's Laboratories) listed. NEMA (National Electrical Manufacturers Association) 5-15R.

POLARIZED VIN TRI OUTLT ADAP WH

Convert any outlet into a triple outlet source, polarized. 15A/125V, NEMA 1-15. UL (Underwriter's Laboratories) listed.

SPLITTER COAX 3-W***************

Our 3-way video signal splitter splits a coaxial video signal from cable TV, antenna, or a VCR for connection of up to 3 TVs, DVD's, or VCRs with a frequency of 5 to 900 MHz.

TRANSFORMR PUSHON

Use this push-on matching transformer for connecting a 300 ohm antenna wire to 75 ohm coaxial input on a TV to convert a 300 ohm signal to a 75 ohm coaxial signal with a push-on F connector.

*INTERIOR SOCKET

Pull chain type interior lamp socket. Electroiler. Compatible with medium base light bulbs. 660 watts/250 volts. UL listed (Underwriter's Laboratories).

*T-KNOB SOCKET

Single-circuit brass turn knob lamp socket. Features phenolic interior, removable knob, and 1/8-inch tapped bushing with set screw. 250 watts/250 volts. UL (Underwriter's Laboratories) listed.

IV 6-OUTLET GROUNDED TAP

Wall tap outlet includes sliding safety covers and converts 2 outlets to 6 grounded outlets. Limited 1-year warranty. CULUS (Underwriters' Laboratories of Canada and the United States) listed.

3-TO-2 TRIPLE TAP

Triple grounding adapter converts 1 non-grounding outlet into 3 grounding outlets. Polarized. 15A/125V. UL (Underwriter's Laboratories) listed.

*MODULAR PLUG CRIMPER

Used to produce patch cables (such as CAT5 or CAT6) and handset cables. Ideal to cut, strip, and crimp. Heat-treated steel frame provides strength and durability. Replacement cutting blade extends the life of the tool. Slip-resistant handles. Works with connector jacks RJ-11 and RJ-45, 2, 4, or 8 pins.

4-OUTLET POWER STRIP

Grounded 4-outlet, durable plastic power strip. Features reset on/off power and 15-amp circuit breaker switch. CULUS (Underwriter's Laboratories of Canada and the United States) and ETL listed. Limited 1-year warranty.

WHT COAXIAL WALL PLATE

For professionally installed coaxial cable outlet, use our flush mount RG6 or RG59 coaxial cable wall plate with gold-plated F-connector.

6-OUTLET SURGE STRIP

450J (joules) 6-outlet surge protector includes sliding safety covers, surge protection indicator, ground indicator and right angle plug. Features illuminated reset on/off power, 15-amp circuit breaker switch, and EMI (Electromagnetic Interference)/RFI (Radio Frequency Interference) noise filtration. CULUS (Underwriter's Laboratories of Canada and the United States) listed.

*BRN LAMP SOCKET

Single circuit phenolic fixture socket with screw terminals and IPS bracket. Brown finish. 660 watts/250 volts. UL (Underwriter's Laboratories) listed.

WHITE CUBE TAP

Multi-outlet tap adapter. Converts single grounded outlet into 3 grounded outlets. Heavy-duty vinyl construction. 15A/125V. UL (Underwriter's Laboratories) listed.

PUSH-BUTTON SOCKET

Phenolic interior lamp socket with high heat push-buttons and brass finish. Features 1/8-inch threaded bushing in cap. 660 watts/125 volts. UL (Underwriter's Laboratories) listed.

*PULL CHAIN SOCKET

Trim cap and shell for medium base bulbs. Features 1/8-inch threaded bushing in cap and polished gilt finish. 660 watts/250 volts. UL (Underwriter's Laboratories) listed.

8-OUTLET STRIP W/TIMER

8-outlet power strip with mechanical timer. This is a great energy-saving power strip. The easy-to-set dial gives the user added security and flexibility. 4 outlets are always On and 4 are controlled by the timer. 4-foot, 14/3 cord.

SOCKET/OUTLET ADAPTER

Converts any medium base lamp socket into a non-polarized, 2-prong outlet. NEMA 1-15R. 600W/120V. UL (Underwriter's Laboratories) listed. White.

3-TO-2 TRIPLE TAP

Triple grounding adapter converts 1 non-grounding outlet into 3 grounding outlets. Polarized. 15A/125V. UL (Underwriter's Laboratories) listed.

*LAMP HLDR CLUSTER

2-light lampholder cluster. Medium base with treated aluminum screw shell. Twin 1/8 IPS Male (top and bottom). 660 watts/250 volt. UL (Underwriter's Laboratories) and CSA (Canadian Standards Association) listed.

WHT 6-OUTLET GRND TAP

Wall tap outlet includes sliding safety covers and converts 2 outlets to 6 grounded outlets. 15A/125V/1875W. Limited 1-year warranty. CULUS (Underwriters' Laboratories of Canada and the United States) and ETL listed.

6' DIGITAL HDMI CABLE

The Digital Plus HDMI cable transfers uncompressed high definition video and multichannel digital audio including surround sound. This cable allows the transfer of digital audio and video in a single cable, permitting a less confusing mess of wires and organized home theater center. The HDMI connector is small, which makes it ideal for installers and in-wall use. HDMI cables can be used with HDTV's, receivers, DVD players, and games.

OUTLT/LAMPHOLDER ADAPTER

Plugs into standard outlet and converts it to a bulb holder socket, medium base. 600W/125V. UL (Underwriter's Laboratories) listed.

TWIN LIGHT SOCKET ADAP BR

Single socket to twin socket. 660W/125V. UL (Underwriter's Laboratories) listed.

IV SOCKET ADAPTER

Single socket to twin socket. 660W/125V. UL (Underwriter's Laboratories) listed.

BRN SURFACE LAMPHOLDER

Surface mounted, incandescent lampholder with pull chaing. Ideal for use with 2 or 3-wire, No. 12 or 14 nonmetallic sheathed cable. Bus bars for feed-through connections. Knockouts for back, knob, or tube wiring. (2) No. 8 wood screws included. Brown. 660-watt/250-volt. UL (Underwriter's Laboratories) listed.

BLK SOCKET ADAPTER

Converts single socket to lampholder with 2 nonpolarized outlets. Pull chain controls lampholder only. 250W/125V. UL listed. Polarized.

BLK SOCKET ADAPTER

Converts single socket to lampholder with 2 standard plug outlets. UL listed.

MEDIUM BASE SOCKET

Medium base candle socket with removable hickey. Phenolic body with lining over aluminum screw shell only. Body is 1-5/32" O.D. Height from center of knob to bottom of hickey is 1-1/16", overall height with hickey is 2-7/16". 250W/250V, UL listed.

$4.99
SOCKET PIN

Medium base. No stripping, splicing, or soldering necessary. Pins pierce conductors when cap is screwed down. Provides positive contact. Accepts No. 14 to No. 12 stranded insulated wire. Detachable zinc-plated wire hook. Heavy-duty phenolic socket. 660 watt/250 volt. UL (Underwriter's Laboratories) listed.

PIGTAIL SOCKET

Keyless pigtail lamp socket. Features (2) 6-inch AWG No. 14 type TW stranded wire leads. Rubber construction. UL (Underwriter's Laboratories) listed.

PORCELAIN LAMPHOLDER

Glazed porcelain lampholder featuring (1) 2-wire outlet with NEMA (National Electrical Manufacturer's Association) configuration 1-15R. 2 screw terminals with removable interior for easy installation. Mounting screws and short chain with 3 foot braided cord and bell included. Lampholder rated 250-watt/125-volt. Outlet rated 15-amp/125-volt. 4-1/2 inch outside diameter. Fits 3-1/4 inch or 4 inch outlet box. UL (Underwriter's Laboratories) listed.

PORCELAIN LAMPHOLDER

1-piece, glazed porcelain lampholder with pull chain. 2 screw terminals, 4-1/2 inch outside diameter with knockouts to fit 3-1/4 inch or 4 inch outlet box. Includes captive mounting screws. Removable interior top wired. Short chain with 3 foot braided cord and bell included. Shade holder groove. 660-watt/250-volt. UL (Underwriter's Laboratories) listed.

PORCELAIN LAMPHOLDER

2-piece, ring-type porcelain lamp socket. Screw terminals/wire ways. 1-3/4 In. O.D. x 1-3/8 In. H. Medium base, single-circuit. Rated 660 watt/250 volt. UL (Underwriter's Laboratories) listed.

PORCELAIN LAMPHOLDER

Surface mounted. Medium base with open terminals. 1-7/8 In. O.D. x 1-1/2 In. H. Mounting holes on 1-15/16 In. centers (diagonal from terminals). Rated 660 watts/250 volts. UL (Underwriter's Laboratories) listed.

Page

Recently Viewed Products